Production of Particle‐Stabilized Nonspherical Emulsion Drops in Simple Shear Flow

Nonspherical drops are of interest in the formation of microcapsules in life sciences like food, pharmacy, and cosmetics, agro and fine chemicals as well as material sciences. Out of many systems, particle‐stabilized emulsion drops, so‐called Pickering emulsions, exhibit an interesting formulation. Systems with Pickering particles applied in an excess amount were investigated. During deformation, the particles fully covered the enlarged drop interfaces and prevented its relaxation to a spherical drop shape. Nonspherical drops could be produced in simple shear flow using an adequate process routine. The production in a simple device is a promising high‐throughput alternative to microfluidic devices.     

全尾砂和废石联合胶结充填体最佳配比及应用

针对红岭铅锌矿分级充填骨料来源不足、地表废石堆积污染环境的情况,提出将该矿选厂产生的全尾砂和地表废石作为充填骨料的联合胶结充填方案。分别测试了全尾砂和地表废石的物理化学性质,验证了碎石和全尾砂作为联合充填骨料的可行性。通过充填配比试验,分析了不同配比全尾砂废石充填体强度特性,得出了最佳充填配比。结果表明,充填试块的强度随灰砂比减小而减小,随养护龄期增加呈增大趋势,随充填料浆质量浓度增大而增大,最佳配比为: 胶结充填灰砂比1∶8、普通充填灰砂比1∶12,全尾砂∶废石配比4∶6,质量浓度78%。根据研究结果,在红岭铅锌矿进行了全尾砂废石充填技术工业应用,证实该技术可行。     

Adaptive actuator failure compensation design for unknown chaotic multi‐input systems

In this paper, an adaptive control approach is designed for compensating the faults in the actuators of chaotic systems and maintaining the acceptable system stability. We propose a state‐feedback model reference adaptive control scheme for unknown chaotic multi‐input systems. Only the dimensions of the chaotic systems are required to be known. Based on Lyapunov stability theory, new adaptive control laws are synthesized to accommodate actuator failures and system nonlinearities. An illustrative example is studied. The simulation results show the effectiveness of the design method. Copyright © 2014 John Wiley & Sons, Ltd.     

Energy dissipation capacity of fibre reinforced concrete under biaxial tension–compression load. Part I: Test equipment and work of fracture

The objective of this research was to analyse the differences in the dissipated energy under uniaxial tension and biaxial tension–compression load of fibre reinforced concretes using the Wedge Splitting Test. Under biaxial load the specimens were subjected to compressive stress ratios from 10% to 50% of the concrete compressive strength perpendicular to the direction of the tensile load.Under biaxial tension–compression load the energy dissipation capacity of the specimens decreases compared to the uniaxial tension load case on average 20–30%. It is believed that the decrease is a result of the damage mechanism of the concrete matrix and deterioration of the fibre–matrix and/or aggregate–cement paste interfaces in case the section is additionally loaded with compression stresses. This indicates that dimensioning of concrete elements under biaxial stress states using material parameters obtained from tests conducted on specimens under uniaxial tensile load is unsafe and could potentially lead to a non-conservative design.In the second part of this paper the extent of the fracture process zone under uniaxial tension and biaxial tension–compression load will be examined with the Acoustic Emission technique and the reasons for decrease of the energy dissipation capacity under biaxial load will be further discussed.     

Macromolecular motions and hydrodynamic radius variation in dilute solutions under shear action

Understanding the dynamics of single polymer chains and rheological mechanism in dilute polymer solutions under shear stress is essential for fields such as the petroleum and food industries, biomedical materials and drug delivery. Here we present an experimental method for measuring the viscosity of polymer solutions and studying the variation of single polymer chain conformation and the mechanism of molecular motions according to the relationship between the intrinsic viscosity, [η], and the shear rate. Of striking interest is that we find that [η] changing with the shear rate presents three stages which may explain the nature of the viscoelastic performance of polymer solutions and the isolated molecular motions. The significance of these results is the finding of the polymer chain deformation to match the pore throat which has enormous potential implications in drug delivery, genetics and biomedicine © 2014 Society of Chemical Industry.     

基于信号增强的缓慢泄漏检测方法

目前管道泄漏检测方法可有效检测突发泄漏，对于缓慢泄漏则存在检测灵敏度低、定位不准确等问题。基于此，提出了一种基于信号增强的缓慢泄漏检测方法。通过信号压缩（抽取及移位）克服缓慢泄漏压力信号下降平缓的缺点；根据声波信号具有波形尖锐突出、对突发泄漏敏感的优点，通过建立以压力为输入、虚拟声波为输出的声波信号变送器模型，将压力信号转换为声波信号，克服了泄漏压力信号容易被淹没在管道压力波动及背景噪声中的缺点，实现了缓慢泄漏信号的增强；利用临近插值方法重构虚拟声波信号，基于延时互相关分析实现了缓慢泄漏的准确定位。实验结果表明，该方法具有显著的信号增强效果和定位精度，实现了缓慢泄漏的准确检测。     

Recent progress of physical failure analysis of GaN HEMTs

Gallium nitride (GaN)-based high-electron mobility transistors (HEMTs) are widely used in high power and high frequency application fields,due to the outstanding physical and chemical properties of the GaN material.However,GaN HEMTs suffer from degradations and even failures during practical applications,making physical analyses of post-failure devices extremely significant for reliability improvements and further device optimizations.In this paper,common physical characterization techniques for post failure analyses are introduced,several failure mechanisms and corresponding failure phenomena are reviewed and summarized,and finally device optimization methods are discussed.     

Numerical investigation on optimization of thermal analysis due to immersion of hybrid nanostructures in a fluid of shear dependent viscosity using the finite element method

This article considers the dispersion of hybrid and mono nanoparticles in a fluid with viscosity (Williamson) dependent on shear rate, over a heated surface moving with nonuniform velocity and exposed to a magnetic field in the presence of an applied current. Extensive modeling leads to complex coupled mathematical models that are solved numerically via the finite element method (FEM). Convergent simulations are run to investigate the role of parameters on the dynamics of flow fields. The magnetic field intensity plays a role in controlling the magnetohydrodynamic boundary layer thickness (BLT) and thermal radiation controls the thickness of thermal boundary layers (TBL). However, the magnetic field intensity is responsible for an increase in BLT. In contrast to this, thermal radiation plays a role in controlling the thickness of the TBL. The impact of shear rate dependent viscosity on velocity is remarkable for both fluids. The motion of both of the fluids slows down when viscosity varies as a function of shear rate. Viscosity depending on the shear rate has a significant impact on wall shear stress. It is observed from simulations that wall shear increases when the parameters appearing in the model for shear rate dependent viscosity are increased. However, this increase in wall shear stress associated with a hybrid nanofluid is greater than the increase in wall shear stress associated with a mono nanofluid.     

循环荷载作用下钢桥面铺装疲劳损伤失效行为研究

针对钢桥面铺装工程中普遍采用的改性沥青(Stone Matrix Asphalt,SMA)、浇筑式沥青(Guss asphalt,GA)、环氧沥青(Epoxy asphalt,EP)混合料双层铺装结构,进行了循环车载作用下钢桥面与沥青混凝土铺装疲劳损伤特性理论分析与试验研究。基于疲劳损伤度,研究了钢桥面铺装疲劳损伤失效行为和疲劳开裂过程中损伤场、应力和应变场动态演变机制,推导出疲劳失效时的损伤场、应力和应变场计算表达式,并给出钢桥面铺装疲劳寿命理论公式。以三座钢箱梁桥桥面铺装(润扬长江大桥2005,南京长江三桥2005,苏通大桥2008)为例,对不同铺装结构组合方案下的复合梁进行疲劳试验分析和使用寿命理论预测。实例研究结果表明,钢桥面铺装疲劳损伤失效行为预估模型合理可行;相较于改性沥青、浇筑式沥青,环氧沥青混合料具有较强高的强度低变形能力,更适合于大跨径钢桥面铺装抗疲劳的设计要求;由环氧沥青混合料组合而成的“双层环氧沥青混凝土”和“浇注式沥青混凝土(下层)+环氧沥青混凝土(上层)”的抗疲劳性能优于其它沥青混合料铺装结构组合方案,同等厚度组合情况下疲劳使用寿命可延长1倍~2倍以上;“双层环氧沥青混凝土”已应用于润扬长江大桥、南京长江三桥和苏通长江大桥钢桥面工程,并已成功运行10年以上,其跟踪观测结果良好。     

基于马尔可夫随机场的加密二值图像有损压缩算法

尽管当前已有众多二值图像的压缩方法,但这些方法并不能直接应用于加密二值图像的压缩。在云计算、分布式处理等场景下,如何高效地对加密二值图像进行有损压缩仍然是一个挑战,而当前鲜有这方面的研究。针对此问题,提出了一种基于马尔可夫随机场(MRF)的加密二值图像有损压缩算法。该算法用MRF表征二值图像的空域统计特性,进而借助MRF及解压缩还原的像素推断加密二值图像压缩过程中被丢弃的像素。所提算法的发送方采用流密码对二值图像进行加密,云端先后利用分块均匀但块内随机的下抽样方式及低密度奇偶校验(LDPC)编码对加密二值图像进行压缩,接收方则通过构造包含解码、解密及MRF重构的联合因子图实现二值图像的有损重构。实验结果表明,所提算法获得了较好的压缩效率,在0.2~0.4 bpp压缩率时有损重构图像的比特误差率(BER)不超过5%;而与针对未加密原始二值图像的国际压缩标准JBIG2的压缩效率相比,所提算法的压缩效率与其相当。这些充分表明了所提算法的可行性与有效性。